Ideal interface for wireless mics and mixing boards
The DXA-SLR PURE is a beautifully simple adapter with passive circuitry for noise free operation. Dual combo 1/4″ / XLR inputs are transformer balanced for isolation. Ideal for applications where no phantom power or additional amplification is needed such as attaching a wireless mic or a mixing board to your DSLR camera. Has built-in trim controls, VU meter and headphone monitoring. Requires no power to pass the audio signal.
Note – this device is not intended for use with wired microphones as no power or amplification is provided.
Out of stock
Maximum Input Levels: MIC level: -3dBu, LINE level:+14dBu
Output Level: -36dBu at 0dB on the VU meter
Frequency Response: 20Hz to 20kHz (+/- 0.5dB)
THD: Less than 0.01% @ 1kHz, -30dBu input
S/N Ratio: 85dB @ 1kHz, -30dBu input
VU Meter: 18 to +3dB in 3dB increments
Battery Type: One 9 volt alkaline or lithium battery
Battery Duration: 10 hours typical with alkaline battery 20 hours typical with lithium battery
Dimensions: 6” x 3.75” x 1.75” (L x W x H)(152mm x 95mm x 44mm)
Weight: 18 oz (0.51 kg)
Connect any wireless mics or a feed from a mixing board or both at the same time. The DXA-SLR PURE makes it easy to capture the pure, clean sound directly from a mixing board for live performances. Gives you all the features you need to connect, control and monitor the audio. The trim controls and VU meter allow you to quickly and easily set the proper recording levels for the best performance every time. A built-in headphone jack with a high powered amplifier lets you monitor the audio while recording. Inputs are virtually unclipable and the circuity is robust for very high reliability.